Power Inverter Monitoring System

Power Inverter Monitoring System

The Monitor is a fully programmable monitoring system for unattended or remote locations. This system will monitor normally on (N.O.) or normally closed (N.C.) contacts and also includes a runtime accumulator and a pulse count. This unit will also monitor AC power and the battery condition. On the top of the unit LED indicators to show the status of each monitored function.

• Fax
• Voice Message for Alarm Cond.
• E-mail
• Pager
• Alpha Pager
• Modem
• Power Requirements: 120 V, 60 Hz, 10 Watts
• Power Surge Protection: 17 V
• Battery System: 6 C-Cell Rechargeable Nicad
• Battery Charging: Precision Voltage Controlled
• Battery Back-up Time: 10 - 15 hours

In real time graphic 8 universal inputs the status tab shows name, value, status, unit of measure and min / max values.  The data logger can log up to 32,768 input readings  Any report logged by the system can be stored or sent via e-mail or fax by location and by time of day.  This item will allow your PC to communicate automatically with multi Monitor units.  Polling is a process of calling units to retrieve the data log or event log.  This item, auto answer allows your PC to receive alarm calls when the destination type is set to modem.  This item will call up to 32 telephone numbers or e-mail address to report the alarm conditions or to send reports.  This allows you to use the data log and event log and tie the information into the daily log.  The event logger displays all events that have occurred over a total period of time or just a selected period of time.  This is the screen that has all the pertinent information such as unit phone numbers, date, dial-out, settings, access acknowledgement code, password and incoming call settings.  This unit can be programmed via a local serial port or remotely by modem using an IBM compatible computer with the Windows Operating System.  This is included in the Monitor software package.

·         Monitor

·         Inputs

·         Data Logs

·         Reports

·         Polling Mode

·         Auto Answer

·         Destinations

·         Unit Scheduler

·         Events

·         System

·         Programming